2013-2016 Hyundai Veloster Turbo Gains Performance with AEM Cold Air Intake System

Hyundai Veloster AEM Cold Air Intake with Gunmetal Gray Finish
Hyundai Veloster AEM Cold Air Intake with Gunmetal Gray Finish
Polished AEM Cold Air Intake for the 2013-2015 Hyundai Veloster Turbo
Polished AEM Cold Air Intake for the 2013-2016 Hyundai Veloster Turbo

The 2016 Hyundai Veloster Turbo provides both great looks and excellent performance. First off, the overall appearance starts with its updated lower body panels, continues with the compact exterior and finishes with its spacious high-tech interior. Secondly, the performance the 2013 to 2016 Hyundai Veloster Turbo comes from its powerful 1.6 liter twin-scroll turbo charged GDI DOHC 4-cylinder engine which is rated at 201 horsepower. The engine's performance will help get you moving when it is time to have fun and still offers an EPA rated 35 MPG on the highway.

As with most performance oriented vehicles, there is always room to make a great vehicle better. So for those that have the 2013-2016 Hyundai Veloster Turbo and are looking for more horsepower and torque, AEM offers the 21-724P and 21-724C cold air intake systems.

AEM Air Intake Installed on a 2016 Hyundai Veloster Turbo
AEM Air Intake Installed on a 2016 Hyundai Veloster Turbo
AEM's Hyundai Veloster Gunmetal Gray Cold Air Intake
AEM's Hyundai Veloster Gunmetal Gray Cold Air Intake

AEM's 21-724C and 21-724P cold air intake systems have been designed and engineered with performance in mind. After extensive testing with multiple tube configurations, AEM engineers went with a two-piece, 2.75 inch aluminum intake tube design which routes a 7 inch cone filter down by the front bumper fog light. This allows the air filter to pick up cooler, ambient air flow for more consistent power gains across the powerband. This air intake system provided an estimated 16 horsepower and 14 ft-lbs of torque at 5700 RPM on AEM's in-house dyno. You can read more about this on the 21-724C's and 21-724P's air intake testing summary.

Both the 21-724C and 21-724P cold air intake systems come with all of the required hardware for installation without having to perform any modifications to the Veloster engine or body. To install these cold air intake systems, simply remove the restrictive OEM air intake system and air box, then install AEM's high performance cold air intake following the easy to read, step-by-step installation instructions.

Included in these AEM cold air intake systems is a two piece air intake tube, PCV (positive crankcase vent) and air recirculation vent attachments, air intake tube connection hose, mounting hardware, hose clamps and AEM's 21-2157DK DryFlow® Synthetic (non-oiled) high flow air filter.

AEM Air Intake for Hyundai Veloster
Dyno Chart for Hyundai Veloster Air Intake Systems 21-724P and 21-724C
Dyno Chart for Hyundai Veloster Air Intake Systems 21-724P and 21-724C
  • PCV Vent and Recirculation connection points
  • Increased Horsepower
  • Polished Aluminum or Gunmetal Gray Finish
  • Reusable Dryflow Synthetic Air Filter
  • Excellent Air Filtration
  • Lifetime Limited Warranty

AEM's 21-2157DK washable and reusable air filter was chosen for its air flow characteristics and large surface area. Specifically, the larger surface area can provide high air flow rates while still offering excellent air filtration for your engine. In addition to the filtration benifit, by having a larger surface area, this performance air filter can go up to 100,000 miles before cleaning is needed, depending on driving conditions. When it does become time to clean your air filter, simply spray on the AEM synthetic air filter cleaner, rinse out the cleaner and dirt until the water runs clean, then let the air filter dry. Once dry, the air filter can be reinstalled.

In short, the AEM 21-724C and 21-724P cold air intake systems will provide a great performance add on for the 2016 Hyundai Veloster models with the turbo charged 1.6 liter engine. Furthermore, these air intake systems are covered by AEM's limited lifetime warranty.

AEM's 21-724C and 21-724P cold air intake systems fit the following Hyundai Veloster models:

•2016 HYUNDAI VELOSTER TURBO 1.6L
•2015 HYUNDAI VELOSTER TURBO 1.6L
• 2014 HYUNDAI VELOSTER TURBO 1.6L
• 2013 HYUNDAI VELOSTER TURBO 1.6L

AEM cold air intakes for Hyundai Veloster models can be found on the Hyundai Veloster Cold Air Intakes page, but if you are looking for AEM performance products for a different vehicle, use the AEM Product Search. To find an AEM dealer near you, use the AEM Dealer Search or simply visit AEMintakes.com.


Related AEM Articles
• 2012 Hyundai Veloster Gains Horsepower with AEM Cold Air Intake System