Printer Image

2014-2015 Ford Fusion 2.0L EcoBoost Turbo Upgrade to Better Performance with AEM Intake

2014-2015 Ford Fusion 2.0 turbo AEM intake system

2014-2015 Ford Fusion 2.0 turbo AEM intake system replaces the factory air ducting and air filter box with an aluminum AEM air intake tube and an open AEM Dryflow® air filter

Ford EcoBoost technology has managed to squeeze good power and excellent fuel economy out of surprisingly small engines. The 2.0L EcoBoost inline-four cylinder engine is the top performing available engine for 2014 and 2015 Ford Fusion models. This small, but fun-to-drive, engine provides a fusion of excellent fuel economy with 240 horsepower and 270 lb-ft of torque. The Ford 2.0L Ti-VCT I-4 EcoBoost engine can be found in upgraded Fusion models, like the Titanium, and can be further upgraded with the addition of an AEM® intake system.

2014 and 2015 Ford Fusion 2.0-liter EcoBoost models can benefit from an AEM Air Intake

2014 and 2015 Ford Fusion 2.0-liter EcoBoost models can be distinguished from 1.5L EcoBoost powered cars by the 2.0 engine’s use of dual exhaust

2014 and 2015 Ford Fusion 2.0L EcoBoost turbo models can be upgraded to an AEM intake system that replaces the restrictive factory air intake ducting and enclosed air filter box with a free-flowing mandrel bent aluminum AEM air intake tube and a large open element AEM Dryflow® air filter. An AEM intake system, like number 21-743C for 2014 and 2015 Ford Fusion 2.0L EcoBoost turbo models, is able to minimize restriction, straighten airflow, and increase the amount of airflow available to the engine. More air and less restriction means more usable power throughout the engine’s RPM range by reducing the amount of energy needed for the engine and turbocharger to breathe.

More air and less restriction means more usable power throughout the Ford Fusion 2.0L EcoBoost engine using AEM intake

More air and less restriction means more usable power throughout the Ford Fusion 2.0L EcoBoost engine’s RPM range by helping the engine and turbocharger to breathe

The AEM 2014 to 2015 Ford Fusion 2.0L EcoBoost turbo air intake has been dyno tested and shown to improve horsepower and torque delivery across the entire RPM range. On the dyno, a stock 2014 Ford Fusion 2.0L EcoBoost with all-wheel drive (AWD) made an estimated additional 11 horsepower and a remarkable 15 lb-ft of additional torque at 4,100 RPM when equipped with AEM air intake 21-743C. In addition to increasing horsepower, lowering air intake tract restriction and increasing airflow will help the 2.0 EcoBoost engine’s turbocharger to spool up quicker, in turn improving acceleration, drivability, and giving the Ford Fusion a sportier engine sound.

AEM air intake system 21-743C is an excellent bolt on performance upgrade which includes all the necessary hardware and step by step installation instructions for 2014-2015 Ford Fusion 2.0L EcoBoost models. This AEM intake is equipped with a non-oiled conical-shaped AEM Dryflow air filter for high airflow, excellent filtration, and exceptional engine protection. The mandrel bent aluminum cold air intake tube, finished in charcoal gray, and the application specific air filter heat shield are covered in a durable powder coat finish to provide long lasting good looks.

AEM Dryflow synthetic air filters are washable, reusable, and made in the USA to ensure years of engine protection. To provide 2014-2015 Ford Fusion 2.0-liter owners with peace of mind, AEM Induction Systems stands behind its products with a Lifetime Limited Warranty. AEM air intake system 21-743C is designed to boost performance of the following turbocharged Ford Fusion models:

2015 Ford Fusion 2.0L
2014 Ford Fusion 2.0L

Use the Search by Car or Truck tool to find additional Ford Fusion performance upgrades, or for other vehicles, from AEM Intakes. To find an AEM dealer near you, use Search for AEM Dealer or simply visit AEMintakes.com.


Estimated Horsepower Gain for 2014-2015 AEM Ford Fusion 2.0L Air Intake System

AEM Induction Systems

 

Find Your Horsepower Here!

a stock 2014 Ford Fusion 2.0L EcoBoost AWD made an estimated additional 11 horsepower
On the dyno, a stock 2014 Ford Fusion 2.0L EcoBoost AWD made an estimated additional 11 horsepower and a remarkable 15 lb-ft of additional torque at 4,100 RPM/td>
  • Increased 11 Horsepower @ 4100 RPM
  • Reusable Dryflow Synthetic Air Filter
  • Excellent Air Filtration
  • Lifetime Limited Warranty

AEM Blog Home