We use cookies to personalize content and ads, to provide social media features and to analyze our traffic. We also share information about your use of our site with our social media, advertising and analytics partners. Learn more.
By Vehicle
By Vin
Photo uploaded
By Dimension
K&N Eleven Inch Custom Assemblies
Eleven Inch Dominator Air Filters - Chrome
K&N's 11" diameter race-ready air cleaners can flow the amount of air required for the Holley Dominator carburetors. 7-5/16" flange base has a 3/4" rise velocity stack.
11" DOMINATOR AIR FILTER
| Neck Flange |
Element Height |
K&N P/N Element |
Filter OD |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
| 7-5/16" | 3-1/2" | E-1250 | 11" | 6 | 60-1230 | 4.50" |
| 7-5/16" | 5" | E-3680 | 11" | 6 | 60-1240 | 6.00" |
| 7-5/16" | 6" | E-3690 | 11" | 6 | 60-1250 | 7.00" |
Eleven Inch Air Filters - Chrome
When space is a premium, yet high performance required. Base is available in three (3) flange sizes and various heights to fit a wide variety of applications.
| Neck Flange |
Element Height |
K&N P/N Element |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
| 2-5/8" | 2-1/8" | E-1200 | 3,6 | 60-1130 | 3.12" |
| 2-5/8" | 3-1/2" | E-1250 | 3,6 | 60-1140 | 4.50" |
| 5-1/8" | 2-1/8" | E-1200 | 4,6 | 60-1170 | 3.12" |
| 5-1/8" | 2-3/16" | E-1200 | 6 | 60-1150 | 3.37" |
| 5-1/8" | 3-1/2" | E-1250 | 4 | 60-1180 | 4.75" |
| 5-1/8" | 5" | E-3680 | 6 | 60-1190 | 6.00" |
| 5-1/8" | 5" | E-3680 | 4,6 | 60-1200 | 6.00" |
| 5-1/8" | 6" | E-3690 | 4,6 | 60-1210 | 7.00" |
| 5-1/8" | 6" | E-3690 | 6 | 60-1220 | 7.00" |
Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.
FOOTNOTES 1) Includes vent kit 2) Vent kit available, P/N 85-1190 3) 1/2" vent tube on base 4) 3/4" vent tube on base 5) Top is chrome & base is hi-temp nylon 6) Chrome top & base. * Will not fit Edelbrock carbs with electric choke. ** Total Height = minimum clearance required above carburetor flange.
