We use cookies to personalize content and ads, to provide social media features and to analyze our traffic. We also share information about your use of our site with our social media, advertising and analytics partners. Learn more.
Fourteen & Sixteen Inch Custom Assemblies
Fourteen Inch Drop Base Air Filters - Chrome
Race ready low profile air cleaner. Drops filter 7/8" or 1-1/4" below carburetor flange. 5-1/8" flange fits all popular 4 barrel carburetors. Four element heights to fit a wide variety of applications. Note: 7/8" drop will fit carburetors with electric choke mechanisms.
1-1/4" DROP BASE
Neck Flange |
Element Height |
K&N P/N Element |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
5-1/8" | 3" | E-1650 | 2 | 60-1280* | 2.75" |
5-1/8" | 4" | E-3750 | 2 | 60-1290* | 3.75" |
5-1/8" | 5" | E-3760 | 2 | 60-1300* | 4.75" |
5-1/8" | 6" | E-3770 | 2 | 60-1310* | 5.75" |
7/8" DROP BASE
Neck Flange |
Element Height |
K&N P/N Element |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
5-1/8" | 3" | E-1650 | 2 | 60-1430 | 3.12" |
5-1/8" | 4" | E-3750 | 2 | 60-1440 | 4.12" |
5-1/8" | 5" | E-3760 | 2 | 60-1450 | 5.12" |
5-1/8" | 6" | E-3770 | 2 | 60-1460 | 6.12" |
Fourteen Inch Air Filters - Chrome
Popular 14" chrome racing style assembly. Raises element 9/16" above carburetor flange. 5-1/8" flange fits all popular 4 barrel carburetors. Four element heights to fit a wide variety of applications. Will clear HEI distributors.
Neck Flange |
Element Height |
K&N P/N Element |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
5-1/8" | 2-5/16" | E-3740 | 1 | 60-1263 | 3.87" |
5-1/8" | 3" | E-1650 | 1 | 60-1264 | 4.62" |
5-1/8" | 4" | E-3750 | 1 | 60-1260 | 5.62" |
5-1/8" | 5" | E-3760 | 1 | 60-1270 | 6.62" |
14 & 16 Inch Dominator Air Filters - Chrome
14" DOMINATOR AIR FILTER
K&N's 14" diameter race-ready air cleaners can flow the amount of air required for the Holley Dominator carburetors. 7-5/16" flange base has a 3/4" rise velocity stack.
Neck Flange |
Element Height |
K&N P/N Element |
Filter OD |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
7-5/16" | 4" | E-3750 | 14" | 5 | 60-1235 | 5.50" |
7-5/16" | 5" | E-3760 | 14" | 5 | 60-1245 | 6.50" |
7-5/16" | 6" | E-3770 | 14" | 5 | 60-1255 | 7.50" |
16" DOMINATOR AIR FILTER
This 16 inch Dominator Assembly flows up to 1,150 CFM (cubic feet per minute)
Neck Flange |
Element Height |
K&N P/N Element |
Filter OD |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
7 5/16" | 3 1/2" | E-3804 | 16" | 7 | 60-1640 | 3.25" |
7 5/16" | 4 1/16" | E-3806 | 16" | 7 | 60-1641 | 3.813" |
7 5/16" | 4 1/2" | E-3808 | 16" | 7 | 60-1642 | 4.25" |
Fourteen Inch Triangle Air Filter - Chrome
K&N's new custom chrome triangle assembly is designed to make any engine compartment come to life. This triangle assembly comes with a 3" high K&N Filtercharger®, has smooth radius corners and fits most carburetors with 5-1/8" flange.
Neck Flange |
Element Height |
K&N P/N Element |
Filter OD |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
5-1/8" | 3" | E-3737 | 14" | - | 60-1470 | 3.62" |
Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.
FOOTNOTES 1) Includes vent kit 2) Vent kit available, P/N 85-1190 3) 1/2" vent tube on base 4) 3/4" vent tube on base 5) Top is chrome & base is hi-temp nylon 6) Stainless Steel top & chrome base. 7) Base and top are chrome plated. * Will not fit Edelbrock carbs with electric choke. ** Total Height = minimum clearance required above carburetor flange.