List Price: $437.79
You Save $140.80 (32.2%)
$296.99 USD
Part:   21-764C

AEM 21-764C Cold Air Intake

AEM Cold Air Intake System
Rating Star 1 Rating Star 2 Rating Star 3 Rating Star 4 Rating Star 5   4.8
  • Increased horsepower
  • Tuned and dyno-tested to improve acceleration and engine sound
  • Low restriction aluminum tubing
  • Easy to install using commonly available tools
  • Air filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)
  • Washable and reusable oil-free filter media
  • AEM Lifetime Limited Warranty

The AEM 21-764C fits some Volkswagen Jetta, Volkswagen Jetta GLi, and Volkswagen Passat models. See vehicle applications for details.
The AEM 21-764C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle’s restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Volkswagen Jetta, Jetta GLI, and Passat models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-764C vehicle applications to determine the legal status for each vehicle.

[More Information on AEM Cold Air Intake Systems]
Specifications AEM 21-764C Product Specifications
Estimated Horsepower Gain12 HP @ 4500 RPM
Replacement Filter21-2113D-HK
Air Filter ColorRed
Air Filter MaterialNon-woven Synthetic
Air Filter Outlet ShapeRound
Clamps Included3
Clamp MaterialStainless Steel
Clamp StyleRegular
Couplers Included1
Product StyleAEM Cold Air Intake System
Air Filter Height7.125 in (181 mm)
Intake Pipe Color / FinishGunmetal Gray
Intake Pipe MaterialAluminum
Street Legal In All US States No
TUV Approved (Europe)No
Weight12.2 lb (5.5 kg)
Product Box Height10.25 in (260 mm)
Product Box Length36.19 in (919 mm)
Product Box Width18.13 in (460 mm)
California RestrictedNot legal for sale or use in California
Mounting Hardware IncludedYes
WarrantyLimited Lifetime

Horsepower gains based on similar vehicle dynamometer test. Results will vary.
WARNING: Cancer and reproductive
Reviews Product Reviews

Caleb Justice from Draper, Utah
July 15, 2018 - Part 21-764C
The instructions were pretty straight forward, I didn't notice a difference performance wise but it sounds amazing, definetly worth it, especially if you want to get a tune.
Brandon Johnson from Morgantown, West Virginia
November 13, 2017 - Part 21-764C
Hello, Over all I have been very satisfied with the product. I do have one issue with the intake, which is the welding job at the I believe crank case connection, the connection that is close to where the intake connects to the turbo. The weld job on one half is raised which limits the clearance that the factory piece has to snap into place. The connection isn't able to snap into place because of the welding job. The factory piece from the OEM intake is approximately three inches in length, which allows way more than enough room for the factory piece to connect to the intake, which snaps on and fits very securely into place. I believe the required amount of space is between one half to one inch, and the weld job restricts this by probably a millimeter or two. If the weld job had not been restrictive, I do believe it would have snapped into place and would have sat flush to the intake if the welding had not been in the way. The connection hasn't popped off, but I do feel it has not snapped into place where it belongs. Perhaps you could extend this welded piece on your intake by a centimeter, which would allow a perfect fit with a little extra room and a safety net with varying welding jobs. I am very happy with the induction noise created with the addition of the intake, and think that the instructions although brief, were very helpful. If the welding job had not had been restrictive, I would have rated this 5/5.
Luis Alberto Hernandez Rodriguez from Laredo, Mexico
August 30, 2016 - Part 21-764C
Excelent quality, excelent product. I will purchase from them again.